|
|
Adams & Westlake 1907 Catalog
Electric Railway Signal Lamps |
Index
(In Original Catalog Order) |
| |
|
| No. 208. |
Round Body, Steel Tail Lamp, with dash hangers |
| No. 209. |
Round Body, Steel Tail Lamp, with rigid brackets |
| No. 161. |
Round Body, Steel Tail Lamp, with bracket socket |
| No. 130. |
Round Body, Steel Tail or Classification Lamp, with dash hanger |
| No. 183. |
Automatic Round Body, Steel Tail Lamp, with dash hanger |
| No. 168. |
Round Body, Steel Tail Lamp |
| No. 24. |
Round Body, Tin Tail Lamp, with two 3-inch or 4-inch lenses |
| No. 23. |
Round Body, Tin Tail Lamp, with two 3-inch or 4-inch lenses |
| No. 214. |
Round Body, Tin Tail Lamp, with one 4-inch lens |
| No. 22. |
Square Body, Tin Tail Lamp, with rigid bracket |
| No. 20. |
Square Body, Tin Tail or Classification Lamp, with rigid bracket and two 4-inch lenses set at right angles |
| No. 21. |
Square Body, Tin Tail or Classification Lamp, with rigid bracket and two 4-inch lenses set opposite each other |
| No. 19. |
Square Body, Tin Tail Lamp, with dash hanger |
| No. 39. |
Square Body, Tin Signal Lamp |
| No. 94. |
Round Body, Tin Corner Marker |
| No. 210. |
Combination Day and Night Signal Corner Marker |
| No. 211. |
Square Cast Body, Combination Day and Night Signal Corner Marker |
| No. 212. |
Triangular Body, Combination Day and Night Signal Corner Marker |
For cases in which it is unnecessary to conform to standard signals of the steam railroad, special lamps have been designed to meet existing requirements.
On the following pages [below] are illustrations of various types of lamps that are being widely used as Classification, Destination and Rear-end Marker or Tail Lamps.
|
|
No. 208 Round Body, Steel Tail Lamp
Non-sweating Ventilation
Sliding door.
With dash hangers.
Heavy steel throughout.
One 4 or 5 3/8-inch ruby lens; other size lens if desired.
|
No. 209 Round Body, Steel Tail Lamp,
Non-sweating Ventilation
a
With rigid bracket.
Otherwise, same as No. 208. |
|
|
No. 161 Round Body, Steel Tail Lamp
Non-sweating Ventilation
With bracket socket.
Heavy steel throughout.
Otherwise, same as No. 208. |
No. 130 Round Body, Steel Tail or Classification Lamp
Non-sweating Ventilation
With dash hanger.
Heavy steel throughout.
Bracket substituted for hanger, if desired.
Equipped with one 5 3/8-inch white lens, hinged to permit the insertion of colored glass behind lens to change signal. |
|
|
No. 183 Round Body, Steel Tail or Classification Lamp
Non-sweating Ventilation
Heavy steel throughout.
Furnished with bracket if desired.
Equipped with dash hanger; one 5-inch or one 5 3/8-inch white lens.
Signal changed from exterior lamp by vertical sliding movements.
Equipped for red, green and white signals, which permits its use as a Classification lamp.
Interlocking device automatically lock one color disc above lens, while the other is in position back of lens, displaying desired signal. |
No. 168 Round Body,
Steel Marker or Tail Lamp
Non-sweating Ventilation
Heavy steel throughout.
Equipped with 1,2,3, or 4 lenses of colors and sizes desired.
|
|
|
No. 24 [and No. 23] Round Body,
Tin Tail Lamp
Adjustable bracket.
Three inch or 4-inch lenses.
With two lenses of any desired color, set at right angles.
No. 23 is same lamp with lenses opposite.
|
No. 214 Round Body, Tin Tail Lamp
Side bracket socket.
With one 4-inch ruby lens. |
|
|
No. 22 Square Body, Tin Tail Lamp
With rigid bracket.
With one 4-inch ruby lens. |
No. 20 Square Body, Tin Tail or Classification Lamp
With rigid bracket.
Two 4-inch white lenses, set at right angles.
Colored glasses for changing signals contained in pocket outside of lamp. |
|
|
No. 21 Square Body, Tin Tail or Classification Lamp
With two 4-inch white lenses set opposite each other. Otherwise same as No. 20. |
No. 19 Square Body, Tin Tail Lamp
With dash hangers.
One 4-inch ruby lens. |
|
|
No 39 Square Body Signal Lamp
With one or two 4-inch lenses. To be used with incandescent lamp.
|
No. 94 Round Body, Tin Corner Marker
Employed for designating routes.
Hollow stationary bracket to permit wiring.
With one 3-inch lens of any desired color, to be used with incandescent lamp. |
|
|
No. 210 Combination Day
and Night Signal Corner Marker
For incandescent lamp.
Heavy steel throughout.
Has low circular deck flange.
Especially designed for elevated railroad service.
Faces of lamp-body of different colors, for designating day signals; lenses corresponding in color to faces, for night signals. Can be fitted with cast tripod deck support similar to No. 212, if desired.
|
No. 211 Square Cast Body, Combination Day and Night Signal Corner Marker
For incandescent lamp.
Especially designed for elevated railroad service.
Faces of lamp-body of different colors, for designating day signals; lenses corresponding in color to faces, for night signals. |
 |
No. 212 Triangular Body, Combination Day and Night Signal Corner Marker
Tripod deck support.
For incandescent lamp.
Heavy steel throughout.
Especially designed for elevated railroad service.
Faces of lamp-body of different colors, for designating day signals; lenses corresponding in color to faces, for night signals. |
Notes. Special thanks to Tim Eizinger (Thanks, Tim!) who provided these scans from the 1907 Adlake catalog.
Back to 1907 Adlake Catalog Introduction
|
